How does the Clarence Tree Removal team cut down trees?

We follow a simple, yet tried and true process:

Tree inspection and analysis:
Our tree expert will start by inspecting the tree and what is required to take down the tree, which includes examining the structure and roots.

We will also search for any decay and fractures and make sure to take note of this.
Then we’ll also take a look at the balance and steadiness of the tree.

Create a tree removal strategy:

We then discuss with the owner, what they want to have done and we examine the size of the trunk.

We will then need a plan to lower the top portions of the tree once they are cut down, and will have harness and ropes in place to do so.

Other options include using a crane to help this process if it’s a rather large and tall tree.

Preparing the Site for Tree Cutting

Our team will prepare the area where the tree will be removed, including clearing a path around the tree and making a path for transporting the tree parts prior to cutting.

Preparation also includes making sure other areas are protected such as outdoor furniture, pots, gardens, patios or moving items that are in the way of the process.

The Safety Gear Required for Tree Removal in Clarence, NY

We have a simple safety check in place, to make sure everything is prepared before we cut a single branch.

• Our safety gear includes:
• Hard Hats
• Safety Glasses
• Protective Pants made from Nylon
• Harnesses and Saddles
• Gloves
• Cables

We will also be lowering the tree parts by using harness and ropes.

We create a loop around the tree trunk, so we have some stability when climbing the tree. As the climb gets higher, we’ll be pulling on the rope for a tighter grip.

We climb the tree while having a chainsaw attached to our belt which we will be using to cut down the necessary tree parts.

Cut, Climb and Repeat Until Finished

When we get to the part of the tree that needs to be removed or trimmed, we use the chainsaw attached to our waist and we cut the branch into pieces and either let them fall or hoist them down. The chainsaw is also held in place with a rope, in case we loose our grip on it.

If there are items or if the area below is prone to getting damaged, we will tie up the branches and bring them down using a rope slowly to the crew down below.

Tree Trimming and Pruning

When our team is removing a tree, we’ll leave some of the branches in place to provide us a stepping stone to where we want to go.

If all the branches are removed, the tree can become unbalanced, and we may have a harder time cutting it down.

So we strategically, have some branches in place to provide some stability for our tree climbers.

Cutting the branches and the trunk of the Tree

As our tree expert goes down from branch to branch, we will trim any leftover branches.

Once our Clarence Tree Removal team gets to the ground floor, we should have just the stump and the roots of the tree left.

And at this point, we would work on stump grinding if that’s something that is arranged with the property owner.

You Need to Use a Professional Tree Service Company for Tree Removals

There are so many things that can go wrong when it comes to cutting down trees.

There is a chance of injury, wounds, falls, and electrical hazard when dealing with trees next to power lines.

You also need the right equipment and the proper training in able to use the equipment which also comes with its own risks of injury.

Not only that, but property damage near the tree can also be a factor when cutting down trees, especially as a DIY project.

Main Takeaways for Removing Trees

Tree removal takes a lot of planning, analyzing, training and expertise to get it done safely and precisely.

Without a background in tree work, one should not attempt to remove a tree by themselves because of all the potential risks it includes.

Therefore, if you want the best tree service in Clarence NY, then please give us a call and let’s schedule your free estimate today!

Call Us: (716) 333-7102

How We Take Down Larger Trees – The Process

While we do not recommend for anyone to try tree removal by themselves, we definitely do not recommend cutting down large trees by themselves.

Doing this kind of work requires the proper strategy along with identifying issues that could make the tree swing out of control.

It also requires the right equipment such as harnesses and chainsaws and a crew doing the work.

Cutting the Whole Tree

Our tree expert will start by examine the structure of the tree and decide if we can cut down the tree as a whole or if it’s better to do it in sections.

The area below must have enough space for the tree to be laid flat, but as most homes don’t have enough space for this, we usually cut it into pieces.

Then we will clear the area from anything that might be impacted by the fall of the tree and also contingency plans in case the tree falls down in an unexpected way.

If it’s a smaller tree, our team will decide which way it should fall.

This would generally be the side which the tree is leaning towards or the part which has more foliage.

Also, we will make inspect for decays and defects which may lead to unexpected results.

When it’s time to start removing the tree, we will wrap a cord to the tree to direct the direction of the tree’s path.

We’ll then start to chop down the tree.

We can do this by sawing a wedge on the side of the tree towards the area which we want it to fall towards, along with another cut below it in the opposite direction.

Depending on the tree, we might place other cuts on the tree as well.

Tree Removal in Sections

For bigger trees, we might need to come up with a plan to cut it down in smaller pieces.

We’ll usually use a rope to tie around the core of the tree and trim down parts of the tree to make it easier to lower or drop with the rope.

To be able to pull this off, we need to make accurate cuts within the tree so that the smaller pieces falls in the right direction.

Our groundsmen will be able to guide the cables so that the branches can fall down safely.

Operating a cane is another optional for bigger trees, and using a crane can speed up the process, and improve safety. It really depends on the type of tree, the size and the situation for us to determine if we need a crane or not.

If we were to use a crane, there needs to be enough area for the tree and also the crane so a space of around 200-450 square feet is needed for this type of strategy.

We’ll use the crane to lift the expert up to the top where we can attack ropes and cables as we trim the top portions and bring them down using cables.

We then repeat this process, until the entire tree is removed, and the owner is happy with the results.

Cleanup Process – Leave Your Property Looking Brand New

As the tree is removed, there can be many remnants of the tree including small twigs, branches and other large pieces of timber.

We’ll be able to clean all this up and smaller pieces can be fed through a chipper to generate wood mulch.
Bigger logs can be used for firewood, or used for carpentry and wood projects.

Whether you want these or not, we can have a discussion on what to do with them after we have finished our tree removal in Clarence, NY.

Stump Removal Option

After we have removed the tree, the property owner has the option to remove the stump or leave it.

We usually grind the stump down as close to the floor as possible, or at whatever height the owner wants, but if you want it completely removed, we also have that option as well.

Usually, you might want to leave a stump for design purposes such as landscaping, or a place for a flowerpot or a chair or use it as a table.

We can also remove it completely with a stump grinder and for smaller sized trees, we can remove it manually with a shovel.

Call: 716-333-7102